CALIBER ARMOR AR550 III+ MULTI-CURVE STEEL SAPI STYLE BODY ARMOR

***Manufacturer’s Estimated Lead Time: Fast Delivery estimated at 1-2 weeks!! AR550 Level III+ Steel Body Armor Panel (10×12 and 11×14) Sold in singles Ergonomic Multi-Curve design at no extra cost Shooters Cut Rated and tested to: NIJ STD-0101.06 Level III and also special threats listed in NIJ STD-0101.07 Draft Rifle 2 Available in Standard Coating or we highly recommend the PolyShield Anti-Spall Coating as an added protection Proudly made in the Louisville, KY U.S.A Caliber Armor have gone above and beyond to bring you steel body armor of a HIGHER CALIBER. This can be seen with Caliber Armor bend process, their fragmentation coating and finishing details. This was the material that they started from and had the most experience with. They’ve seen it, done it, improved it. Steel Body Armor provides great protection that can stop multiple projectile hits. Caliber Armor have been working with different levels of abrasion resistant (AR) ballistic steel for years and have not found a better product than their AR550 Steel Body Armor Plates. This armor is rated at a level III+ as it can defeat special threats like M855 rounds. All Caliber Armor steel plates come in one ergonomic curve option. Caliber Armor have worked with LE, and first responders to design a curve that you can be comfortable wearing. Caliber Armor provides this at no additional cost. What is unique about the way that they bend their steel is important too. Caliber Armor have designed a press that creates a multi curve bend in ONE step. Why is this important? When you do multiple bends to achieve a multi curve, it puts extra strain on the plate which can weaken it. Caliber Armor has replicated the same curves that you have seen in multi curve ceramic armor for years. Caliber Armor aggressive Shooters Cut body armor plates shave off weight while still providing enough coverage to protect your vital organs. Use the CaliberX™ Soft Armor Backers for even more protection and comfort. Caliber Armor standard plate comes coated to protect the plate from rust and the elements. One concern with Steel Armor is fragmentation containment. Some of that fragmentation is contained in the armor’s plate carrier, but there still is a risk of lethal shrapnel. Caliber Armor recommends their Caliber Anti-Spall add on. Caliber Armor has teamed up with friends at Bullet Liner® to formulate an anti-spall coating specifically for their armor application. This addition to your steel plate gives you peace of mind when wearing steel armor. Weights for Caliber Armor AR550 Steel Body Armor: 10 x 12 – 7lb 6oz Standard vs. 8lb 7 oz with Anti-Spall Coating 8 x 10 – 4lb 14.8 oz Standard vs. 5lb 14.8 oz with Anti-Spall Coating 11 x 14 – 8lb 13.3 oz Standard vs. 9lb 13.3 oz with Anti-Spall Coating NIJ STANDARD-0101.06 Tested and verified to meet or exceed ballistic resistance as specified under NIJ Standard- 0101.06 Level III and also tested for special threats listed in the new NIJ Standard- 0101.07 (Draft) Rifle 2. MANUFACTURING TOLERANCES: Thickness dimensions are +-1/8 in. Width and length dimensions are +0.00 to 0.25 in. All weights are +- 5%. EAR & ITAR NOTICE: Caliber Armor Level III rifle rated ballistic rifle plates are under control of the Commerce Department’s Bureau of Industry and Security (BIS) and administered under the Export Administration Regulations (EAR) and remain subject to the export control laws of the U.S . Government. Export or retransfer of Level III Rifle Plates by any means to any foreign end user, or for any other end user, whether in the U.S., or abroad without the written approval of the U.S. Department of Commerce, is prohibited. Caliber Armor Level IV rifle rated body armor plates fall under the jurisdiction of the International Traffic in Arms Regulations (ITAR) and are subject to eth export control laws of the U. S. government. Export or transfer of Level IV Rifle Plates by any means to any foreign end user, or for any other end use, whether in the U.S. or abroad, without written approval of the U. S. Department of State is prohibited. The sale, transfer, transportation, or shipment outside of the U.S of any product prohibited or restricted for export without complying with U.S. export control laws and regulations, including proper export licensing, documentation, or authorization, is strictly prohibited and may result in civil penalties and/or constitute a federal crime. Products purchased from this website may contain hardware and/or technical data within the definition of 15 CFR Chapter VII, Subchapter C – EXPORT ADMINISTRATION REGULATIONS Part 730 through 774, as well as 22 CFR Chapter I, Subchapter M – INTERNATIONAL TRAFFIC IN ARMS REGULATIONS part 120 through 130 and may be subject to the export control laws of the United States. The unauthorized reproduction, dissemination, or transfer of these products or technical data by any method to a foreign person, whether within the U.S. or abroad without the written authorization of the Department of Commerce Bureau of Industry & Security (BIS), Department of State Directorate of Defense Trade Controls (DDTC), or Department of Treasury Office of Foreign Assets Controls (OFAC) is strictly prohibited by law. (Please see 15 C.F.R., 22 C.F.R., 18 U.S.C., 22 U.S.C., and 50 U.S.C. for additional information) Caliber Armor will not engage in any transaction that requires the illegal export of any products and will not assist directly or indirectly with the illegal export or re-export of any products. PRODUCT GUIDE