Electro-Harmonix Canyon Delay and Looper Pedal

About Electro-Harmonix Canyon Jaw-dropping, cavernous delays in a compact package! Packed with more power than pedals taking up more real estate, the compact EHX Canyon Delay & Loopers features a collection of awe-inspiring effects. From pristine digital delay to warm and warbly tape echo, reverse and modulated delays, cascading octave delay and shimmer even an exquisite Deluxe Memory Man emulation. There are ten different effects in all plus a fully featured looper. Internal or external Tap Tempo with tap divide and a chasm full of intuitive secondary knob controls deliver a truly grand experience. 11 modes: • ECHO: digital delay • MOD: modulated delay • MULTI: multi-tap delay • REVRS: reverse delay • DMM: Deluxe Memory Man • TAPE: tape delay • VERB: reverb plus delay • OCT: octave delay • SHIM: shimmer • S/H: sample and hold • LOOP: looper mode w/max loop length of 62 seconds FX LVL Knob Controls the output volume of the delay effect. Delay Knob Controls the delay time of the CANYON, from a minimum position of 5 milliseconds to a maximum of 3 seconds. Feedback Knob Controls the number of repeats of the delayed signal. Input Jack This is the audio input. Tap in Jack Connect an external momentary footswitch to this 1/4″ jack to control the delay time by tapping in a tempo. TAP/DIVIDE Switch and LED This switch controls the Tap Divide setting. When the delay time is set using tap tempo, this button controls the division of the tapped tempo. Footswitch Press this footswitch to switch the pedal between bypass and effect modes. When the pedal is in effect mode, the LED will be lit. The footswitch can also be used to set the delay time by tapping it at least two times. Mode Knob This knob is an 11-position rotary switch that selects which of the CANYON’s delay modes is active. Output Jack This 1/4″ jack is the audio output of the CANYON. Electro-Harmonix Canyon Features Delay time of 5 milliseconds to 3 seconds Tap Tempo with tap divide using the built-in footswitch or an external footswitch Tails switch allows you to choose whether echoes repeat or stop immediately when the pedal is switched to bypass Easy access to “hidden” parameters thru Secondary Knob Mode COMPATIBILITY Designed for use with: Guitar Pedal